Quick Answer: What Cable Do I Need To Connect Subwoofer To Receiver?

How do you hook up a subwoofer to a receiver?

Connect a coaxial cable with RCA-style plugs to the subwoofer output on your receiver.

These cables are often supplied with the subwoofer.

Route this cable to the low-frequency effect jack on the powered subwoofer.

This jack is labeled “Line In,” “Low Level In,” “LFE In” or something similar..

Is a subwoofer cable just an RCA cable?

you can use a standard RCA cable, but a subwoofer cable is suggested as it has more shield in it and provides more clarity and resolution. a subwoofer cable comes with a standard RCA connector but is thicker than the standard RCA cable. … Any RCA cable will do. But go for a thicker cable for better signal transfer.

Can you connect a subwoofer to a 2 channel receiver?

Yes, two (easy) ways to hookup a powered sub in a 2-channel setup. 1) Run the speaker wire from your amp to the sub, then another set of speaker cables to your speakers.

Can you connect a powered subwoofer to a speaker wire output?

Subs can provide a foundation to the sound that few speakers can muster on their own. … Most, but not all, subwoofers have these inputs; they get connected using speaker cables to the same speaker output jacks on your receiver or amplifier that are also hooked up to your speakers.

Can you connect a powered subwoofer to an amplifier?

A subwoofer with speaker-level inputs is especially easy to connect to your older amplifier or receiver! To do so, just connect to the speaker outputs on the source unit using speaker wire and then to the matching inputs on the subwoofer. You can even power speakers from the amp or receiver at the same time.

How do you hook up a subwoofer without an amp?

Hooking Up a Subwoofer Without an Amplifier Start the installation process by removing your speaker from the mounting dock, giving access to its wiring. Mount your subwoofer in your preferred location. Next, reroute the stereo and power supply cables to the subwoofer and connect them.

How do I connect my subwoofer to my RCA cable?

If the subwoofer’s ‘Line In’ uses RCA cables (and if the subwoofer out on the receiver/amplifier also uses RCA), simply plug in using an RCA cable. If the cable is split on one end (a y-cable for both right and left channels), then plug in both the R and L ports on the subwoofer.

Is a coaxial cable the same as a RCA cable?

A digital coaxial connector looks like an RCA connector, but it transmits digital data instead of analog signals. … The digital coaxial cable is thicker than a typical audio cable, however, because it uses the same type of shielded coaxial cable you use to connect your television to your cable box.

Can you connect a subwoofer to a TV?

A direct connection does not need other devices or wires in order to connect the TV’s audio to the subwoofer. … Plug the HDMI cable to the TV’s port and then locate the audio input port on your subwoofer. Once you’ve found that, connect the other end of the HDMI cable to the subwoofer. And there you have it!

Can I connect subwoofer to line out?

Locate the plug on your amplifier that is labeled Sub Out, LFE (low frequency effects) Out or Line Out [source: KEF]. This is the terminal used to connect the subwoofer to the amplifier. … Alternatively, you can connect an RCA cable that can be purchased at any electronics store [source: KEF].

How do you hook up a subwoofer to a receiver without sub?

Right: An RCA Y adapter that can be used with a line level converter to connect to a subwoofer with a single RCA input jack. For subwoofers with only 1 or more RCA input jacks (no speaker level inputs), a simple way to connect them to a receiver with no subwoofer output is by using a line level converter.

How do I connect my subwoofer to left and right input?

To connect a subwoofer to its receiver, you can use an LFE input cable or an RCA line-in cable (used for left and right input options). Assuming your subwoofer has the option to use an LFE input, this will be your best choice. But, if not, then an RCA input option will work.

How do I connect my Monoprice subwoofer to my receiver?

1. Insert the RCA plug at the one end of the cable into the LFE Input jack on the back of the subwoofer. 2. Insert the RCA plug at the other end of the cable into the subwoofer output jack on the back of the amplifier/AV receiver.