- What level should your kick drum be?
- How loud should my beats be?
- What dB should a beat be?
- What is a good EQ setting for vocals?
- Should you record vocals in mono or stereo?
- What program is best for recording vocals?
- What is a good audio level?
- What frequency should a snare be at?
- How do I make my voice EQ deeper?
- Do I need to master my beats?
- Should Kick be louder than snare?
- What is the best EQ setting for bass?
- How do you fix muddy vocals?
- Should vocals be louder than the beat?
- What level should I record vocals at?
What level should your kick drum be?
yes -6 is a good starting point or -10 is fine also.
if its not loud enough turn up your speakers.
everything should sound fine if you mix around and based on the kick.
always stay under 0db, if you go over bring everything down or just drop the master fader a few db..
How loud should my beats be?
Now, for the customer, when an artist records on a beat, its very hard to do that when the beat is maxed out to 0db. … Always give your artists headroom for their mixing, so for me i usually keep my client copies at around -5 / -6 dB to allow enough headroom.
What dB should a beat be?
I recommend mixing at -23 dB LUFS, or having your peaks be between -18dB and -3dB. This will allow the mastering engineer the opportunity to process your song, without having to resort to turning it down.
What is a good EQ setting for vocals?
Best EQ Settings for VocalsRoll off the low-end starting around 90 Hz.Reduce the mud around 250 Hz.Add a high shelf around 9 kHz & a high roll off around 18 kHz.Add a presence boost around 5 kHz.Boost the core around 1 kHz to 2 kHz.Reduce sibilance around 5 kHz to 8 kHz.
Should you record vocals in mono or stereo?
Should you record vocals in mono or in stereo? If you are recording the vocals of one singer in a booth, then you should record in mono. However, if you are recording vocals of multiple singers and instruments, you should record in stereo. The terms mono and stereo are quite common in the sound recording industry.
What program is best for recording vocals?
11 best voice recording software optionsAudacity.Anchor.Cleanfeed.Audio Hijack.GarageBand.Sony ACID Xpress.Keku.SquadCast.More items…•
What is a good audio level?
For safety, no peaks should be above -6db. Most video editors agree that the overall audio level of your audio mix (all of your audio combined) should normalized between -10db to -20db. I personally level my videos around -12db with occasional peaks to -8db. The trick here is to stay away from 0db as best you can.
What frequency should a snare be at?
500 Hz500 Hz – For more body to your snare, the fundamental frequencies around 500 Hz gives the snare a rounder sound. 3 kHz – Add clarity and punch by boosting this area in the upper mids. 10+ kHz – You don’t notice a big difference when you start adding air to the snare, but it does lift the snare sound up a bit.
How do I make my voice EQ deeper?
Applying EQ to a Voice RecordingUse a High Pass Filter to Cut Everything Below 80Hz. … Cut 100-300 Hz to Add Clarity. … Cut 300-400 Hz if the Voice Sounds ‘Muddy’ … A Wide Boost Between 2-6 kHz Can Improve Clarity. … Cut Around 3-5 kHz if the Voice Sounds too Sibilant.
Do I need to master my beats?
Mastering is %100 necessary if you want people to enjoy your tracks. … I don’t master my beats for sale, just mix and leave enough headroom for vocals + mastering. Mastered beats are just going to get crushed again when vocals are added and the whole song’s loudness is brought up.
Should Kick be louder than snare?
The snare is the foundation of the backbeat, and typically one of the loudest elements in the mix. Next, bring the kick fader up until it sounds almost as loud as the snare. It should be loud enough that the low frequencies are rich and powerful, but not so loud that it masks the bottom-end of the snare drum.
What is the best EQ setting for bass?
Using EQ Settings For Better Bass In HeadphonesSet sub-bass slightly above +6db.Bass to exactly in between 0db and +6db.Set low-mids at slightly below 0db.Set mids and upper mids exactly where the bass adjusted to.Finally, your highs must be adjusted slightly lower than upper mids.
How do you fix muddy vocals?
The most common part of a mix that gets muddy is the 200-500Hz area. Fixing it is as easy as carving out a bit of space in these frequencies. Go back to your EQ insert on the tracks that are still sounding a bit muffled. Select the frequency range that you’d like to target and tweak it until it’s sounding better.
Should vocals be louder than the beat?
Should Vocals be Louder than the beat? No and Yes! Well it depends on the genre and style you are mixing or what the song calls for. What you don’t want is a vocal poking out like a sore thumb in your song.
What level should I record vocals at?
When recording vocals, always record at 24-bit resolution, and I suggest a peak record level of -10 dBFS. At 24-bit there is no need to push the level higher than this. These settings should produce the best signal-to-noise ratio with the vast majority of microphone preamplifiers.