Quick Answer: How Many Watts Can A 3 Amp Fuse Take?

Can I use a 5 amp fuse instead of a 3 amp?

But consider this.

A 3A fuse was used for a reason.

If so, yes, you can replace a 3A fuse with a 5A fuse..

Can I use a 13a fuse instead of a 3a?

For an appliance rated as 700W or less, a 3A fuse should be fitted. For appliances above 700W, a 13A fuse should be fitted. … BS1363 has standardised on just two preferred fuse ratings, 3A and 13A, however any fuse rating up to 13A can still be used.

Can I replace a 5amp fuse with a 13 amp?

A 13 will be ok in a 5amp device as long as its ok and your going to get the correct ampage soon. Not a good idea at all, if there is a fault with them you risk a shock or a fire.

What amp fuse do I need for LED lights?

75mm is good for about 7.5 amps max. I generally like to have at least 100% extra rating so a 3 amp fuse max is what i would use. This should be plenty for 4 leds. If you have working leds but blow a 10A fuse i think your wiring needs checking and you will probably find your fuse is directly across the battery.

How many watts can a 5 amp fuse take?

1150 WattsIf your lighting circuit at home is protected by a typical 5 amp fuse you can multiply this by the voltage to get 1150 Watts.

How many watts can a 40 amp breaker handle?

9,600 wattsHow many watts can a 40 amp breaker handle? 40-amp 240-volt circuit: 40 amps x 240 volts = 9,600 watts.

Can I replace a 10amp fuse with a 13 amp?

If you replaced it with 13A fuse, it will allow current more than 10A, so it may possible that other components may get damage due excessive current flow than specified. If TV components can sustain up to 13 A current, you can replace it. … You can put a smaller fuse in with the same “speed” rating.

Can I use a 3 amp fuse instead of a 2 amp?

3 amp should be fine. the fuse is mainly there to protect from burning wires. you might try Radio Shack – they would have the fuse in a higher voltage rating (usually 250 volt), but that won’t cause a problem.

Can you put a 16 amp fuse in a 13 amp plug?

Yes they will. You’ll get about 150A from a 13A supply, any more than that and the fuse will probably pop but it won’t cause any damage to the machine or the supply.

How many amps are in 1500 Watts?

12.5 ampsA Sample Circuit Calculation Using the W ÷ V = A variation of Ohm’s law, you can calculate that 1,500 watts ÷ 120 volts = 12.5 amps.

How many watts can a 13 amp fuse take?

Plugs for appliances rated between about 700 watts and 3000 watts (the maximum rating of a wall socket) should be fitted with a 13-amp fuse (coloured brown).

How many watts is an amp hour?

Watts / Volts = Amps per hour A very small user of power is a 1.2 watt LED light running on a 12 volt power source will use 1.2W / 12V = 0.1 amps. Therefore a 100ah (amp hour) battery will last for 1000 hours.

What happens if you use the wrong amp fuse?

Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. … If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.

Can I put a 10amp fuse in a 5 amp?

Possibly yes. What ever is wired into that 5 amp slot is rated for a max of 5 amps, overdrawing more than 5 amps by removing the 5 amp fuse and putting in a 10 amp fuse can possibly short out a circuit. If there’s a short-circuit it’ll be more than 5 amps, or 13. …

How do you size a 12v fuse?

Find the size of fuse by multiplying the amps required by the device (2) by 1.5. 2×1.25 = 2.5 then we will round up to the nearest fuse size (in multiples of 5 amps) which would call for a 5 amp fuse.

Is it OK to use a higher amp fuse?

In general, NO. Replacing a fuse with a higher-amp fuse is a very bad idea and can lead to fires. Fuses (and circuit breakers) are rated such that they blow or trip before any part of the circuit gets to a dangerous current. … Fix the underlying problem, and you won’t have any more blown fuses.

How many amps is 1000 watts?

8.33 AmpsWatts To Amps Table (At 120V)Watts:Amps (at 120V):900 Watts to amps7.50 Amps1000 Watts to amps8.33 Amps1100 Watts to amps9.17 Amps1200 Watts to amps10.00 Amps15 more rows•Aug 24, 2020

How many watts does 3 amps use?

360 WattsEquivalent Amps and Watts at 120V ACCurrentPowerVoltage3 Amps360 Watts120 Volts4 Amps480 Watts120 Volts5 Amps600 Watts120 Volts6 Amps720 Watts120 Volts23 more rows

How many watts is 240 volts?

1200 WattsWatts = Amps x Volts 5 Amps x 240 Volts = 1200 Watts.

Can you put a 10 amp fuse in a 13 amp plug?

The 13A fuse in place of a 10A fuse wouldn’t directly cause any problem – but then, if there’s a problem with the appliance you’re using, or if you plug in too many things and the current goes over 10A but under 13A, then under the new fuse the extension lead will keep working whereas the old fuse would have blown.

How many watts can a 16 amp fuse take?

Your MCB can hold up to 16 Amps and the voltage applied will determine how many Watts. The formula is simply Amps multiplied by Volts equals Watts. In the case of a 120V supply this means 1,920 Watts for a 240V supply it will be 3,840 Watts.