Question: Do Surrounds Need To Match Front Speakers?

Can you use front speakers as surround?

While much of this comes down to what type of speakers you have, some are interchangeable.

You can use surround speakers as front speakers by swapping out the speakers’ connections in the back of the AV receiver..

Can you play A and B speakers at the same time?

When running two pairs of speakers via the A+B main speaker outputs, impedance and power ratings should be as close as possible to the power of the amp. … Speaker power ratings have nothing to do with how much power they will consume.

Is it bad to mix car speaker brands?

Yes you can, because majority of the front and back speakers are mid-range speakers and operate with the same power, so you can actually get the audio quality from the best brands and hook it all up together to create an audio powerhouse in your car!

Can you mix and match surround sound speakers?

Yes. Mixing and matching speaker brands and styles is fine. … This means the Front speakers should be from the same manufacturer and designed to work together. Surround Left and Right speakers should also be identical to each other, as should the Surround Back speakers.

How many speakers do I need for Dolby Atmos?

four speakersWe recommend installing four Dolby Atmos enabled speakers whenever possible. The use of four speakers will make the placement of overhead sounds more accurate, and you’ll get more precise, realistic sounds when an object, such as a helicopter, passes overhead.

Is surround sound good for music?

It worked fairly well on music and stereo movie soundtracks. While Dolby Surround was simply “better than nothing,” having an active matrix and full-range, stereo surround channels was far superior for listening to music in surround sound.

Do rear speakers need to be behind you?

The rear speakers are positioned behind you, facing forward. Position both pairs of speakers one to two feet above ear level for best performance. A 7.1 system utilizes side and rear surrounds. Direct each speaker towards you for wraparound sound.

Do Atmos speakers need to match?

5.1. With just two Atmos speakers, you are just moving sound back and forth,” he adds. Speaker Type: Full range or bass-managed speakers are best for the Atmos speakers. They should be timbre- and power-matched to the primary speakers. Speakers should always be calibrated using room EQ.

Will any speakers work with Dolby Atmos?

Dolby recommends at least four height speakers for the best result, and any speakers will do. Even better, you won’t need a special Blu-ray player, since all current players support Dolby Atmos. Also worth noting is that all of your HDMI cables will work with Dolby Atmos as well.

Can I use floor standing speakers for surround sound?

If you are looking for the best sound for listening to music, then floor-standing speakers are the best option, and they will also be great in a home theater setup. … All of these speakers can play precise frequencies with the exact crossover between them. Some floor-standing speakers can be very attractive.

Does subwoofer have to be same brand as speakers?

As a general rule, we do not recommend mixing and matching different brands of speakers in a surround sound system. Even mixing different lines within a particular brand can present problems. … In fact, there is rarely any reason to keep your subwoofer the same brand as your main speakers, perhaps other than cosmetics.

Do front and rear speakers have to match?

If you are just using a different brand or model for rear, surround or effects speakers (and now Dolby Atmos ceiling speakers) timbre matching is nice; but far from necessary. … So, the main front speakers should be matched and the surrounds need not be matched to them – although they should be matched to each other.

Are Dolby Atmos speakers worth it?

Dolby Atmos’ being able to create a near real-life listening experience from a movie, video game, or film recording makes it absolutely worth it. This object-based audio system takes surround sound to a whole new level by creating a ‘bubble’ in which sound comes from all angles.

Can you use any subwoofer with speakers?

You can use a subwoofer with any speakers. But the sub is usually connected to a source with sub output, not the speakers. Few brands have the speaker amplifier inside the sub. … Many subs have a speaker bypass on the back but that is a “high input” that you can use when your source does not have sub output.

How do I match my speakers to my subwoofer?

Your best bet is to set the subwoofer crossover frequency to match the rating of the speakers, then turn the frequency higher if you hear a “hole” between the subwoofer and the speakers—for example, if Vin Diesel’s voice sounds thin and wimpy, or if the crashes and explosions in action movies don’t have the impact that …