Question: Can A 5 Amp Fuse Instead 3?

What happens if you put a 13amp fuse in a 10 amp plug?

The 13A fuse in place of a 10A fuse wouldn’t directly cause any problem – but then, if there’s a problem with the appliance you’re using, or if you plug in too many things and the current goes over 10A but under 13A, then under the new fuse the extension lead will keep working whereas the old fuse would have blown..

Can I put a 13a fuse in a 3a?

For an appliance rated as 700W or less, a 3A fuse should be fitted. For appliances above 700W, a 13A fuse should be fitted. … BS1363 has standardised on just two preferred fuse ratings, 3A and 13A, however any fuse rating up to 13A can still be used.

Can I replace a fuse with a higher amp?

In general, NO. Replacing a fuse with a higher-amp fuse is a very bad idea and can lead to fires. Fuses (and circuit breakers) are rated such that they blow or trip before any part of the circuit gets to a dangerous current. … Fix the underlying problem, and you won’t have any more blown fuses.

Can I replace a 2 amp fuse with a 5 amp fuse?

In the case of 5A fuse, the same will happen. It would be able to bear current supply ranging to 5 Amperes. Clearly, the size or specification of a fuse doesn’t affect its performance.

Can I use a 5 amp fuse instead of a 10 amp?

Possibly yes. What ever is wired into that 5 amp slot is rated for a max of 5 amps, overdrawing more than 5 amps by removing the 5 amp fuse and putting in a 10 amp fuse can possibly short out a circuit.

What happens if you use the wrong amp fuse?

Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. … If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.

Can I use a 2 amp fuse instead of 1 amp?

Originally Answered: Can I replace a fuse with a lower amp? Yes of course you can, that’s no problem. Of course, the fuse will blow sooner and maybe immediatley because the circuit is designed to pull more current than the fuse can handle, but that won’t do any actual harm… you just won’t be able to use the device.

How many watts can a 5 amp fuse take?

1150 WattsIf your lighting circuit at home is protected by a typical 5 amp fuse you can multiply this by the voltage to get 1150 Watts.

Can I use a 5 amp fuse instead of a 3 amp?

But consider this. A 3A fuse was used for a reason. If so, yes, you can replace a 3A fuse with a 5A fuse.

What is 3 amp fuse used for?

Different types of fuses Plugs for appliances rated up to about 700 watts should have a 3-amp fuse (coloured red). For example: 3A Fuse – Table lamp, standard lamp, television, video, computer, mixer, blender, fridge, freezer, power drill, jig saw, soldering iron.

Can I replace a 10amp fuse with a 13amp fuse?

If you replaced it with 13A fuse, it will allow current more than 10A, so it may possible that other components may get damage due excessive current flow than specified. If TV components can sustain up to 13 A current, you can replace it. … You can put a smaller fuse in with the same “speed” rating.

What happens if I put a bigger fuse in my amp?

If you replace a fuse with a higher amp one it will work but create an unsafe circuit. It could cause a failure of the device burn it up, start a fire. The fuse is designed as a safety device. It should not only be the correct amperage but also the correct voltage and fast or slow blow.